Also, I went from a 1070 to a 6700 XT myself, can say it doubled framerates in games that needed it (Elite: Dangerous in planetside areas for example), so that's something for you to consider; if you're getting 30 FPS then it'll be a good upgrade, if you're only get 10 FPS it might not be enough.
Ryzen 3700X, however I suggest to not worry about bottlenecking; even if does, it's likely to give you the most FPS per $ spent on upgrading. I ran on a i7 920 for the longest time (including the GTX 1070).
Av1 is pretty well supported now on a lot of devices thanks to dav1d, and it’s the video codec with the best quality:compression ratio. “broad device compatibility” will be up to you and your devices, I would seriously look into it. It’s what I personally encode all my stuff to.
Why is AC-3 bad? It’s pretty much compatible with everything, holds Dolby Digital and atmos. Especially if the source is already encoded in AC-3, would it be wise to re-encode it?
yeah but OP is wondering about transcoding their stuff. there is no reason to encode to AC3. I would just use traditional surround if you plan kn transcoding it.
I recommend using H.265 and Opus for audio. In my opinion, encoding to H.264 in 2023 is not a wise choice. AV1 is a good option, especially with hardware encoding and compatible devices.
First, just to be clear because codec terminology can be weird, x264 is a h264 encoder, not a separate codec. H265 is not an open standard so it may not play back properly if you use a Firefox or a Firefox based browser. I would recommend av1 if you can encode it, as it is good for quality and file size, however only new GPUs can encode it. CPUs can encode it slowly, but if you don’t have a new gpu (like 40 series Nvidia, arc, or AMD 7000 and maybe 6000) I would recommend vp9. It is a bit worse for file size but it won’t take a year to encode and should be compatible with most browsers.
Thanks for the clarification on 264. I have an AMD 3700x with Radeon 470 graphics card. I’d like a decent balance between CPU/GPU encoding so not to put too much stress on just the CPU. I know nothing about AV1. Can Smart TVs read the AV1 or VP9 codec? I know my LG will take H.264 & H.265 but I haven’t tried the others?
I am not too knowledgeable on different encoders, but I don’t know if using cpu and gpu is an option. Av1 and vp9 are open standards, meaning basically anything can implement them, but av1 is new so older devices haven’t. The tv will probably handle vp9 fine, but I would still recommend transcoding a test video and looking if it plays back natively. With that gpu av1 is definitely not supported so I would recommend vp9.
AV1 is only just appearing in TV chipsets, and software support and stability will lag behind there for some time. if you only use your videos on a modern PC or a new-ish phone, then sure go for it, it’s pretty great.
Personally though, as good as AV1 is, I’d be avoiding it for something like a plex/emby/jellyfin library purely because while computers and phones now have decent support, many TVs and streaming boxes do not, the software on those that do is lacking support or is patchy, broken or unstable, and you can run into difficulty even transcoding those files for playback on unsupported devices because of the transcoder backends having their own support problems depending on your server hardware, operating system, and server software choice.
H265 10bit is the current best for those sorts of media libraries, just about any TV or streaming box from the last 5 years will support it just fine and it is still somewhat easy to encode with hardware acceleration.
I recently ran some of my less critical libraries through fileflows to convert a small subset of oversized H264 files to H265 10bit and with roughly 17000 files processed in those libraries I’ve saved about 5tb. that is skipping small H264 files and files already in H265, and has a few encoding tiers based on file size and some handling of reprocessing outputs that end up larger than the original, which can happen with the lower RF values that I am using.
Output quality has been perfectly acceptable, but i still have many thousands of files that I would prefer to keep in the highest quality possible, regardless of file size.
I see what you mean about the other CODECs like VP9 and AV1. The future looks good for them but for a Plex library not so much. I tried converting a single ~20 minute TV episode and it took about ~16mins for AOM-AV1 and VP9 was somewhat over an hour or so. But, H265 zips right along in ~5 mins or less an ep with not as much strain on the CPU. Probably be going down the H265/AAC route. Thanks for the data & information. It’s helped very much!
That will be down to your GPU having hardware acceleration for certain codecs and not others, because a pure CPU encode of those codecs on anything but an Epyc or other ball tot he wall top end CPU is going to take hours.
My Radeon 470 had Kronos Open CL but I think some of my system drivers have gone crazy because the option to use it has disappeared. I’m really considering a new build even though my system’s only 3.5 yrs old.
Final Fantasy VII. I love the franchise, but never got far into VII. Played through it so I could have an opinion on it, so I could see what I was missing. I ended up very disappointed.
I’d recommended PC part picker to determine compatibility with all your upgrades. You can tinker with different setups fairly easily and have the costs easily accessible. I believe there are also tools to determine likely bottlenecks, but I haven’t searched for many lately.
GPU will definitely be the biggest cost, but also likely the most noticeable improvement. RAM is fairly cheap, so you can bump up to 32 Gb without much expense. Not too familiar with Intel CPUs but it’s possible you might create a bottleneck with a GPU upgrade. Not the end of the world if you’re fine with upgrading that later too.
Thanks! Yeah, maybe I can consider a 6700xt and other minor upgrades, like getting a NVME, an extra 16GB of RAM…It’s a relief knowing that the power supply will hold!
Check what speed your mobo is capable of with the nvme drive option. A blazing fast nvme drive is a relatively cheap way of getting some more response out of your PC. That and a newer GPU it’ll feel like a whole new computer.
I second shapis’s recommendation. I was still gaming on an Ivy Bridge CPU until recently. It wasn’t until this year that games started giving me trouble at 1080p with medium settings, and that was mostly GPU related.
Your 16GB RAM might be fine for now. Most games I’ve played don’t come close to that. Of course, it’s easy enough to check while you’re playing (or doing whatever other tasks you do).
Depending on your OS, your SATA SSD might even be fine. (Although NVMe prices have been and still seem to be dropping, so picking one up in a couple months isn’t a bad idea if your motherboard can handle one.)
Thanks, it seems the M.2 takes SATA and PCIe. I have two slots for them. And it would seem its speed won’t be affected. At any rate, I only have the GPU slot in use (and another small one for the WifiGig thingy for the wireless Vive).
I’m favoring h265 10-bit for my library recently. Whether SDR or not, it seems to provide a slightly better compression ratio and fewer banding artifacts than 8-bit. Any player that can handle 4K streaming content can decode h265 10-bit, so there’s a ton of forward compatibility for the foreseeable future
Baldur’s Gate 3 on my partner’s days off when he wants to play games, that game is That Game, so freaking good, I think about it all the time. Because I don’t want to progress the game past our co-op session’s progress, and I’ve replayed Act 1 solo a few times over by now, I am back with good ol’ Skyrim otherwise.
I know it is a meme, but I genuinely have the thing of only modding and not playing Skyrim. I am proud to say I am at a point where I just play, instead of finding more mods. I feel like I have a pretty stable modlist, seldom crash, and this is because last winter I spent a lot of time with the crashlogger thing weeding out problematic mods. It is really hard not to go to nexus, I actually don’t visit it anymore at all, it is intense FOMO when I see others’ screenshots. My main achievement is that upon returning to Skyrim after a break, I even picked up my same character instead of starting over with fresh mods–it was like, not giving up progress.
I finished NG of Armored Core 6, it’s a good game, and I like it a bit more than other Souls games, largely thanks to how speedy the mech movement is.
I’m going to do bit more NG+, restart Wattam, since I was distracted by some other games previously, and replaying AI The Somnium Files, since I can’t remember the story and bought the sequel on sale a few months ago.
Just an update, finished NG++ of Armored Core 6. NG+ is NG but with slight variation of the mission, since there was branching paths. NG++ has way more unique content than NG+, and the end is satisfying. Final boss is tough, I needed a couple of attempts, and finally found my older loadout that works better against the boss.
I really enjoyed the game, especially since I am having Souls fatigue. Breaking down the game into missions ala Peacewalker makes the game more manageable, and maybe because it focuses so much on loadout, I find the game bit easier / less frustrating than say Elden Ring.
Tried the demo for System Shock remastered and finally started Jet Set Radio with the release of the spiritual successor. They did not age well for me, but I could see why they were popular back in the day
I believe I had this working once but unfortunately I don’t recall having to troubleshoot anything.
Right now I just use a stack and put all my apps the need VPN in that docker stack and use kasm Firefox with ipleak to double check the VPN.
The reason I use the VPN container (gluetun) is I think I can specifically connect it to the nord p2p servers… Is that possible with the proxy settings?
I started playing Children of Morta with my son yesterday and I’m pretty impressed with it. I e tried playing Diablo 3 a couple times and found it really boring, so I assumed dungeon crawlers just weren’t really my thing. But I started to find some depth in the combat after a couple runs in CoM, and I quite like the roguelite cycle and progress. We’re making pretty slow progress because my son is young and kinda sucks at it, but I’m enjoying it more with him than many other games we’ve tried.
I also started Baldur’s Gate 3 with my partner with it yesterday and am pretty much in love so far. I had similar experiences with both Divinity games but they both were just a liiiitle too long and we would lose steam around the end. Hoping that’s not the case with this one.
bin.pol.social
Gorące