Half its developers are probably on the sex offenders’ registry and can’t go within 300ft of schools. And now they’ll get to exploit even the kids whose parents won’t get them a computer yet
I don’t know about Xbox, but drift issue is pretty common in PS5 controller too, and I recall reading that all companies uses sticks from same manufacturer.
Everyone online sings praises of ‘Hall-effect’ sticks, but no one (Sony / MS / Nintendo) is currently using them, probably because of higher cost.
If this works, this will probably solve the issue for Nintendo at least.
It definitely happens with Xbox Series controllers too. Bought a brand new Series controller and a rechargeable pack only for it to get unbearable drift within 5 months
Using the larger, potentially more durable, joysticks would mean a larger potentially less portable Switch. Given that portability is the core feature of the Switch I can understand Nintendo’s reluctance to implement them. Especially when other companies are experiencing similar issues with their sticks. In my opinion a novel approach is the way to go here. Hall effect is nice, but it is costly and could potentially present some legal challenges at the moment.
the problem with the current switch is that the joycona are unusablely small
Increasing the size neard the size of the steam deck really won’t decrease the portivility as your gonna carry a power adapter and a case with it anyways
I find that the JoyCons work fine for most games, granted I have small hands. As for power adapters and carrying cases, I don’t carry an adapter and the case I use is very slim. Just enough to protect from drops really.
I use both frequently, and the size of the switch is a big feature for me. I carry a low profile case and no power adapter. Increasing the size would be a big mistake in my opinion- it would just be a worse steam deck without some really killer new features. In my opinion they should just offer larger joycons for people who want them!
A company already makes hall effect joysticks that are JoyCon sized and they claim to hold a patent for them. I haven’t taken the time to verify, but even if they don’t have a leg to stand on they could still take Nintendo to court.
@JonDorfman, right, but Hall effect analogue sticks themselves have existed for a long time, so that technology in general (except any novel addition) is (most likely) not patented anymore.
Maybe because of all those “Patented” points. It’s possible Nintendo doesn’t want to be 100% dependent on them and want an in-house solution to their problem.
They probably don’t want to use that particular design anyway. I’ve run into a good number of headaches with those joysticks. Not bad enough for me to pull them back out, but certainly enough to be annoying.
I’ve encountered two noticeable issues while using these. The first is probably just shit tier QA, but the second could be that or a design flaw. I haven’t taken the time to tear one apart and reverse engineer it, so I can’t say for sure what the cause is. Anywho, about a third of my sticks will wig out and send complete garbage data when they are pushed to their maximum on one axis. Sometimes it is the X, sometimes it is the Y. Either way it makes the impossible to use and I actually did remove those and replace them. Of the remaining sticks a number of them will depress the under stick button if pushed all the way in one direction. It’s pretty easy to avoid this and it rarely matters so these ones I left alone and didn’t bother to count how many displayed the behavior.
I was hoping hall effects could be the solution. Maybe best that can be hoped for is ones that can be popped out for easy replacement like the dualsense edge.
I have swapped out my Switch analogues with these, and they’re great, I also did it with my Ayn Odin, and the 2nd set had slightly stronger magnets, that caused some touch screen issues, so I swapped out my switch analogues with the odin ones. So I’m gonna guess that the next Nintendo console will be another portable, and they probably don’t want the issues of magnets near screens.
Just use hall effect sensors like everybody else. You can buy hall effect joycon joysticks and 3rd party controllers comparable to the pro controllers that use hall effect joysticks as well. They don’t drift.
It is absolutely amazing that nobody seems to have clicked through to the actual article.
So for all the "just use hall effect sticks" people, the patent is apparently not just for a solution to drift but also a way to add variable pressure to sticks, kinda like what Sony does to triggers.
It took me like fifteen seconds to read deep enough to find that.
For what it's worth, I think it could be interesting, especially if applied in a Nintendo-like way, bur proprietary stuff like that tends to go underutilized. You know, like the triggers on the PS5 controller.
It’s not clear, then, whether developers would be able to change the resistance of the fluid to provide some sort of force feedback, or a resistance similar to that of the triggers in the PS5‘s DualSense controller (for steering in racing games, for example).
For someone who supposedly read the article you seem to be making big assumptions
No, I read the whole thing, including that line, but that's entirely editorializing from the reporter. The quotes from the actual patent are pretty clear, machine translation word soup aside.
You being nitpicky made me go dig up the full patent, which makes it even clearer: "(...) The intensity of the magnetic field can be designated from the application. Thus, it is possible to perform flexible control in accordance with the application".
I don't blame the commenters for not going that extra step, though, that's just me being fastidious. I do blame the reporters focusing on stick drift because mah clicks for not reading the patent properly, though.
EDIT: For what it's worth, I find the idea of a stick being full of ferrofluid or whatever else they're using for this to be... likely finicky and potentially messy and fragile, depending on how much you need in there to make it work properly. This sounds intriguing and weirdly high-tech, but if you made me bet I wouldn't feel comfortable putting money on this showing up on a Switch 2 just yet. Could be wrong, though.
I won’t buy a Nintendo controller again until they’re out for awhile and I know they’re good.
The two I have are garbage and I didn’t even get drift. The stick flick makes a lot of high precision games unplayable. And most of the time I use a third party controller that’s better, more reliable, and half the price.
I mean, that's fair enough, I suppose. Like I said elsewhere I've had more problems with the PS5 controllers than the Switch ones, but my guess is this is luck of the draw. Some people just don't like the Joycon form factor, and that's also fair. I have some wrist issues and split controllers are amazing for my specific issues, so I'm very on board with the design for very specific reasons.
FWIW, I suspect a lot of the issues people report with those things are down to connectivity, not build quality. The BT antenna in those is terrible and it's being power starved to run on their tiny batteries. I've used literally hundreds of Joycon at one point or another and rarely seen legit stick drift, but I've had controllers where in a noisy environment just your hand grip could make the connection get all flaky. What the Switch does in that scenario seems to be to just hold your stick position and call it a day, which isn't great.
I found a comment about the accuracy of the reader combined with a factual difference from the article very ironic and should be elaborated, which you did. +1
For the haptic feedback? No, it's a mechanical screw with a physical stop to keep it from turning at the right time. You can see it disassembled here. The sensor may be a hall effect sensor, I don't actually know, but once again, the patent isn't about drift.
Watching that video gave me flashbacks about how much of a pain in the ass these are to disassemble, too, which is why I have several of these with stick drift issues just gathering dust instead of actually repairing them.
Look up “potentiometers” if you want to understand the workings behind a thumbstick as well as why drift happens.
So, drift happens because the graphite resistance element inside the potentiometers wears out over time due to friction, but these potentiometers are absurdly cheap compared to the alternatives and one company, ALPS of Japan, has dominated this market (not just for the Switch but for everybody) for 20 years that they pretty much out-prices everybody else. So, now you know why companies still use these thumbsticks despite the fact that drift always develop eventually.
Hall Effect sensors are definitely better, but also tend to be heavier and bulkier, so we’ll see if this works out.
I’ve seen them, they are an order of magnitude more expensive than the potentiometer based ones. Good for enthusiast hobbyist upgrades, but I doubt Nintendo is going to go for that considering the pricetag of the Hall Effect sticks.
That’s just because there is only one company making them so… yeah we got expensive joystick replacements. If Nintendo just paid a bit more and went with the HE joysticks in the first place they wouldn’t be in this situation. Why do you think they’re patenting these joysticks with magnetic fluid in em? They don’t want this to happen again so they do what the Japanese do best, over engineer a simple solution.
As a big keyboard nerd it is cool to hear about Alps in another context. They used to dominate the mechanical keyboard market too back in the late 80s.Thanks for sharing!
Same bro. Just completed the first gow a couple days ago. Ready for the second one now. Will definitely be picking up the new gow and horizon forbidden West!
Same here. I bought a PS4 late in its lifecycle to catch up and then was amazed when they started bringing stuff to PC. I’ve really been missing out on some PS5 titles but I’d be much happier to play them on PC. I think I’ll probably be waiting a while for Spider-Man 2 as well.
Yeah, it’s wonderful. I was playing it for nearly 2 hours straight on a flight recently. If you adjust the CPU clock speed and a couple other things, you can squeeze some solid play time out of the Deck with Zero Dawn. It runs amazingly smooth.
If it ran well on a PS4, it runs well on the Deck (at 800p). The Deck is really close to a portable PS4 in performance, ignoring architectural differences.
The Deck struggles with modern titles targeting the PS5. It technically can play these games… But the kind of “technically” that really doesn’t result in a good experience.
Valve’s doesn’t help with it’s ‘Verified’ status. I picked up Dead Space because it’s verified. Within an hour I’d hit the refund button. It ran. It ran at 20fps and looked like absolute ass, but it ran. Not sure that’s what they should be pushing people towards however.
Yeah I agree. They’re super inconsistent with the verification.
Sometimes a game plays perfectly, with zero crashes, at 60 FPS and great graphics… But it’s not verified because one line of dialogue uses a font Valve considered too small.
Then you have a game barely running at 20 FPS and potato graphics, crashing every 43 minutes, and yep totally verified, ready for the Deck.
I guess they’re wanting to show that it can handle the very biggest games? Problem is if people can’t trust the verification process then it’s effectively useless. After my Dead Space issue I’ve already made it standard practise to check ProtonDB before I grab a game.
Porting to PC isn’t minimal effort. It takes a lot of dev time to optimize and make it run well on the wide variety of PC hardware, not to mention the additional PC specific technologies like DLSS that often get implemented. First game had quite a few performance issues at launch that were ironed out over the span of several months.
The point isn’t that it’s quite literally free. It’s a figure of speech.
Between taking a game you’ve already completed and is already popular and reworking it to sell to a brand new audience… versus creating a new AAA title, which one is more expensive?
that were ironed out over the span of several months
It still runs like garbage on my 13700K and 3060Ti, depending on the area. Sometimes, High settings are fine, but way too often I have to drop down to “Original” to get somewhat acceptable FPS (>40) at 1440p with Balanced DLSS. Am I doing something wrong, or was it just even worse at launch?
videogameschronicle.com
Najstarsze