This is well treaded ground and I agree with pretty much everything. I tried to get through RDR2 twice last year but whenever I was doing main story missions I would get frustrated. Partly because of your points, but also for another reason: how the hell can you maintain immersion in the story when the protagonist effectively commits genocide? Seriously the kill count in the missions is so ludicrously high I want to quit every time I do a couple of main story missions. Like I get it, you want to sprinkle some action sequences in there to keep up the tempo, but I can’t take killing a hundred lawmen in some town in a main mission and then have the world go on as if nothing happened.
40 is fine, I can go lower depending on how nadlyO want the experience. I grew up relatively poor, I am not going to completely pass up on an experience I am looking forward to over a lower framerate.
25FPS and 480 pixels vertically is enough for me to get sucked in and forget the world around me.
Which is nice cause that way I can play open world RPGs like Kingdom Come on an old laptop.
Been playing Avowed, and enjoying it a lot. It’s a really good AA rpg in the POE universe, and the worldspace is probably the prettiest I’ve seen in the past couple years. I think the last time a game really 'wow’ed me with visuals, to the point that sometimes I just stopped to appreciate the view, was TW3.
Also played some Avorion, which scraches my Eve Online itch without having to actually play that, and Mabinogi (Frieren crossover event), which was the first game my partner and I played together 15 years ago. It’s gotten so many QoL updates in that time that there’s almost no ‘grind’ anymore, and it’s so much more laid back than other MMOs, and has so much content.
W formularzu rejestracji zaznaczamy, że jest to polskojęzyczna instancja, żeby uniknąć nieporozumień. Ma to być miejsce w pierwszej kolejności dla osób polskojęzycznych. Zresztą okazjonalne ogłoszenia administracji są publikowane tylko po polsku. Faktycznie, jeśli przerzucić zakładkę na “Wszystko” widać, że osoby z tej instancji subskrybują masę anglojęzycznych społeczności i znaczna część osób jest tu faktycznie dwujęzyczna.
Angielski pojawia się u nas w dwóch kontekstach: możliwego użycia interfejsu użytkowników, bo w nim pisane jest oprogramowanie, oraz języka publikacji, bo czasami może mieć to sens. Przykładem tego drugiego może być społeczność !polisz. Jeśli ktoś w ustawieniach konta wybierze np. tylko języki polski i nieokreślony, zobaczy prawie wyłącznie posty po polsku.
For me, it highly depends. Turn-based strategy games, I can easily play at a much lower framerate (30 is fine tbh though I always appreciate more). FPS-style games? 60 is a bare minimum, but 100+ is what I would consider to be enjoyable.
I followed a random guide I found on the internet for amd.
In amd case you can do it from their driver by going to performance tab and choosing tuning.
There you will find gpu setting, set them to manual and from there you can start changing fan speed and voltage. Voltage you change by 50mv first time and if stable by 25. When you come to a point where your game/program crashes you use the value from before that didn’t crash the game and that’s it.
As for nvidia I don’t know because I don’t own one and don’t have the money to own one ( they are 1k euro on average here for 4070 and 2.5k for 4090 on average ) only thing I know is that you will need msi afterburner.
I do it with MSI Afterburner, then do stress tests in 3D Mark to make sure it’s stable. As long as you’re not over-volting you’re fairly safe to experiment. You can either do a flat undevolt, or you can set up a custom curve. Also like another commenter here said, changing the fan curve to actually engage the fans sooner helps keep the temps down, usually the default fan curve prioritizes silence to a disturbing degree.
Changing voltages and fan curves is super situational. And depends on how much you value noise over performance.
That said, I undervolted and underclocked the i7 cpu on my G501 gaming laptop back in the day.
This helped a ton, because the heatsink between the discrete GTX 660M and the CPU, shared a heatpipe. The CPU would only throttle at 90, while the GPU would throttle at something like 75. This meant that because it was basically always hotter, heat from the CPU would conduct via the heatpipe INTO THE GPU, causing it to always thermal throttle, and be unable to be cooled. Because even though it was maxing out and trying to cool down by throttling, the CPU would just keep going because for it the temps were fine. So it would keep pumping heat into the heatsinks and heatpipes, which would then keep the GPU hot, too.
Undervolting the CPU allowed it and the GPU to run at closer to same temps, raising FPS by way of allowing the GPU to actually run a full tilt, even though the CPU was then significantly slower.
Yes, agree that they are situational. In case if my laptop I’m unervolting mycou because if I won’t it will just crash when used at max speed.
Edit: in case of my brother pc, the temps were just horenderous for the perforformance he was getting. Plus the fans were barelly on even at 85C. Undervolting and making the fan curve more agresive allowed him the get much better temps at same fan speed, and lets him play some games he wasn’t able to before cause of themps. And the fans even at 100% are quieter than my laptops at 50% so he doesn’t mind them at all.
bin.pol.social
Najstarsze