The principle of the SCHWALBE CLIK VALVE, winner of the Eurobike Award 2024, is very simple: it works intuitively with a click. What does it need? The valve and the corresponding pump head or pump head adapter. With the Clik Valve, this can be clicked onto the bike valve with minimal force and removed again very easily after successful inflation.
It doesn’t matter which valve and pump you currently have - thanks to conversion kits for all existing bicycle valves and most pumps. To change the bicycle valve, simply replace the valve insert (Sclaverand, Presta, Dunlop, tubeless valve), for the car valve there is an adapter that is screwed over the valve (and can be easily unscrewed again to be able to use petrol station pumps).
The pump head adapter can be integrated into the pump head of current pumps (by clamping or screwing in), even with hand pumps. The Schwalbe Clik Valve can also be inflated with normal SV (Presta) pumps - thanks to this reverse compatibility, you are never at a loss in any situation. And SKS will already be offering its own CLIK VALVE pump at Eurobike.
Schwalbe will soon be producing the first tubes with the Clik Valve.
Found these cute old sheds (still in use!) in Woodland Park while exploring a new route with the knobby-ish gravel tires on my Soma Stanyan. :blobfoxthumbsup: (1)
Definitely getting better with the color calibration tool in #Darktable. Having the flexibility to pick any hue for the illuminant is very nice! :blobfoxgoogly:
I’ve been running 38mm Panaracer GravelKing tires tubeless on my Soma Stanyan for years, but the front tire I just put on has enough wobble to rub in one spot on every rotation. (The wheel itself is true.)
Two shops told me that the tire wasn’t seated right, but I checked and remounted multiple times and it’s seating fine. Even used some rubbing alcohol to lubricate the tire where it seated, but it always mounts up perfectly fine. The tire is the problem.
The second shop gave the real answer after chatting with the folks there for a bit: I should go down a size. It’s a real bummer, but even the Soma website says it can do up to 35mm. :blobfoxsad:
The only other realistic alternative is a new frameset, or at least a new fork, but that will have to wait for a while. :blobfoxgooglycry:
It took many years and many professional bike fits for their extremely valuable #bikeFit tips to finally sink in. :blobfox0_0:
It took me following a hunch over several months to get to the general area where my saddle and handlebars should be for their tips to finally make sense and complete the picture in my mind. (My saddle was way too low for a long time because my first bike fitter was trying to work with my horrible technique early on, which caused me to tear a quad in one leg. :blobfoxscared: )
The slow, silent ride will start at the Davis Bike Collective (1221 1/2 4th St ) this Wednesday 5/15 and will visit 4 different locations in Davis where people have been killed while riding their bikes
The route will be 7.5 miles and is expected to take ~1.5 hrs. We will have some flowers to distribute but feel free to bring your own offerings as well.
@meganL@cycling Can't believe I didn't know about this event. Doesn't look like #STL has one, but I'm reaching out to some local bike orgs to see if we can schedule one for next year. Hope y'all have a good ride!
@alexisdyslexic@cycling So my point is not to act as if Davis is the worst - it's not. But I want to show that you don't have to scratch deeply to hit the car-centrism and ableism. Therefore holding it up uncritically as "Platinum Bike-Friendly" does us a great disservice. #UCAccessNow#CarCenrism#Cycling
@meganL@cycling the best in North America is probably Montreal. But Not Just Bike just made a clap back video about how poorly Montreal stand up to European cities. I don't think we have a good infrastructure anywhere in North America.
But I think we're at an inflexion point and a lot is going to be built out soon.
When @glitter and I got to the bottom of a long hill while #cycling yesterday, I heard the tell-tale sign of a #tubeless leak in my front tire, a well-used #Panaracer#GravelKing. She even said it was smoking, but I knew it was just sealant blowing out.
Thankfully, it was at the end of our ride and I didn't have to deal with steering on a floppy tire. I did snap this picture, though. :blobfoxsweating:
I tried seating it again today and it just wouldn't hold air because of the same spot. That's when I noticed the bulge in the sidewall near the bead, so I decided to toss the tire and put on a fresh (identical) one I had in reserve. The new tire seated without issue, aside from how I had to do it twice because I put it on the wrong way the first time. :blobfoxgooglymlem:
This isn't a knock on Panaracer tire quality, of course. The tire's been through a lot and there was only so much tread left anyway.
@nik After years of struggling because I was afraid to raise my saddle after tearing a quad in 2013 (?), I started raising it some, then noticed that I was able to pedal in smooth and quick circles instead of by mashing down. That circular pedaling is what good technique is. :blobfox: I also had to move my saddle forward quite a bit because my legs would drag me forward with their circular pedaling otherwise.
As far as handlebar position goes, that resolved itself once my core was strong enough. :geblobcatshrug: If you don't try to hold onto the bars for dear life and just let your hands fall where they will, that'll tell you where to move the bars to.
New #Shimano#SLX right crank arm with narrow wide oval chainring. Finally, bottom bracket is as designed, with only 3 spacers and it all fits like a glove.
For all those who like to mix and match #cycling gear - Shimano #Deore axle is to long for SLX crank arm, despite them calling it all the same #HollowtechII...
kids, I'm doing Ride London again this year, raising money for the brilliant Bike Project, who do up bikes and give them, along with training and support, to refugees and asylum seekers. I'm WAY out of shape, having had my slowest start to the year cycling since before COVID. Here's the link to sponsor me, if you'd like to help support them and motivate me :) xxx
"Platinum Bike-Friendly" #DavisCA still hasn't replied to the email I sent about the rampant scofflaw parking in the cycle lane. I just sent them more photos today of the same corporation's vehicle parked illegally, blocking visibility & endangering people at an intersection.
I really like these panniers, though I'm glad that I found a quicker way of managing the shoulder carry strap than the rather daft built-in things #BikeTooter@fedibikes@cycling
@kim@achadwick@cycling I keep it closed using the strap that comes over the top from the back, and have also used the drybag method. The front hook is just there to add tension to the longer strap -- in all my years, I've never had a problem with the strap getting particularly muddy, unless I'm also getting muddy anyway. But different use cases, maybe?
@ravenbait@achadwick@cycling Recumbent low-rider racks put the front panniers in splatter range of the front wheel, while the rider stays high and dry. Of course, the great thing about Ortliebs is you can just run them under the tap.
The over-the-top strap is incredibly useful for overloading the pannier gracefully, dangling random things from, or crossing over with the pannier on the other side for additional security, and I do miss it on my flap-closure Altura panniers (which got relegated to shopping duty when I discovered they were being eaten by the disc brake on my tourer).