cycling

Magazyn ze zdalnego serwera może być niekompletny. Zobacz więcej na oryginalnej instancji.

achadwick, angielski
@achadwick@urbanists.social avatar

Considering handlebar covers/mittens for doing updates in cold weather. They're quite pricey though. Would they help?

It's fairly slow travel, with frequent stops near the footway=sidewalk to record data on the phone. Are they any good for that sort of thing, if I use them with a pair of insulated fingerless gloves underneath? @bikes @mastobikes @cycling

ClintonAnderson,
@ClintonAnderson@universeodon.com avatar

@extua @achadwick @bikes @mastobikes @cycling I got myself a pair of sking gloves a couple of years ago, and they are great!

aWildThorp,
@aWildThorp@triangletoot.party avatar

@achadwick @bikes @mastobikes @cycling

I use a pair of Wobs for biking around in the cold and at ~32(f) I don't even need a pair of gloves on underneath. They're amazing.

bobiko,
@bobiko@pol.social avatar

I wreszcie coś ruszyło się w temacie rozszerzenia dla . Mam w tym udział ;-)

@rower @cycling

LukaszHorodecki,
@LukaszHorodecki@pol.social avatar

@wloczykij @bobiko @rower @cycling
Rozszerzenie jest nakładką na planery tras, takie jak komoot czy ride with gps i pozwala przy układaniu trasy wybierać jeszcze nieodwiedzone miejsca.

bobiko,
@bobiko@pol.social avatar

@wloczykij czy ja wiem czy na telefon ? generalnie mozesz sobie odpallić jako PWA i na żywo śledzić pozycje.

Z reguły to przydatne rozwiazanie dla tych, co planuja sobie dłuższe tripy. bo wąpie, zeby tak spontanicnzie planować wyprawy po okolicy (wokół komina) ;-)

ja w ten sposób odkryłem wiele ciekawych zakątów pomiedzy Wlkp A kujawami. nigdy bym tam nie trafił :D

@LukaszHorodecki @rower @cycling

meganL, angielski
@meganL@mas.to avatar

Wooden removable bollards put in places to protect human life.

Metal permanent bollards put at a corner of a building to protect property.

This is what "Platinum Bike-Friendly" looks like at UC Davis.

@cycling

meganL,
@meganL@mas.to avatar

@alexisdyslexic @cycling So my point is not to act as if Davis is the worst - it's not. But I want to show that you don't have to scratch deeply to hit the car-centrism and ableism. Therefore holding it up uncritically as "Platinum Bike-Friendly" does us a great disservice.

alexisdyslexic,
@alexisdyslexic@urbanists.social avatar

@meganL @cycling the best in North America is probably Montreal. But Not Just Bike just made a clap back video about how poorly Montreal stand up to European cities. I don't think we have a good infrastructure anywhere in North America.

But I think we're at an inflexion point and a lot is going to be built out soon.

achadwick, angielski
@achadwick@urbanists.social avatar
ravenbait,
@ravenbait@mastodon.scot avatar

@kim @achadwick @cycling I keep it closed using the strap that comes over the top from the back, and have also used the drybag method. The front hook is just there to add tension to the longer strap -- in all my years, I've never had a problem with the strap getting particularly muddy, unless I'm also getting muddy anyway. But different use cases, maybe?

kim,
@kim@fediverse.fun avatar

@ravenbait @achadwick @cycling Recumbent low-rider racks put the front panniers in splatter range of the front wheel, while the rider stays high and dry. Of course, the great thing about Ortliebs is you can just run them under the tap.

The over-the-top strap is incredibly useful for overloading the pannier gracefully, dangling random things from, or crossing over with the pannier on the other side for additional security, and I do miss it on my flap-closure Altura panniers (which got relegated to shopping duty when I discovered they were being eaten by the disc brake on my tourer).

tk,
@tk@bbs.kawa-kun.com avatar

Still happily using rim brakes in 2024. :blobfoxcomfy:

@cycling @mastobikes @biketooter

alexantemachina,
@alexantemachina@mastodon.social avatar

@daihard @snacks @biketooter @cycling @mastobikes @tk use hydraulic rim brakes and you’re good.

daihard,
@daihard@social.ridetrans.it avatar
tk,
@tk@bbs.kawa-kun.com avatar

Good fit is really hard if the rider doesn't already have good technique. :blobfoxgoogly:

@cycling @mastobikes @biketooter

nik,

@tk how did you learn?

tk,
@tk@bbs.kawa-kun.com avatar

@nik After years of struggling because I was afraid to raise my saddle after tearing a quad in 2013 (?), I started raising it some, then noticed that I was able to pedal in smooth and quick circles instead of by mashing down. That circular pedaling is what good technique is. :blobfox: I also had to move my saddle forward quite a bit because my legs would drag me forward with their circular pedaling otherwise.

As far as handlebar position goes, that resolved itself once my core was strong enough. :geblobcatshrug: If you don't try to hold onto the bars for dear life and just let your hands fall where they will, that'll tell you where to move the bars to.

@cycling @mastobikes @biketooter

tk,
@tk@bbs.kawa-kun.com avatar

In all my years of , I've never found a great solution for cold weather. If I bundle up so I'm not chilled, then I soak everything with sweat in short order. If I wear less, then I freeze. I've tried Merino wool, synthetics (Gore, Event, etc.), and so on, but nothing works well enough for me.

Sadly, that means I don't do anything exciting on the during the coldest part of the year. Just my daily local loop. :blobfoxsad:

@cycling @mastobikes @biketooter

forgottenthirst,

@tk @biketooter @cycling @mastobikes I find I have a crazy steep temp gradient with almost any aerobic exercise and chronically overdress, so this makes sense to me

awl,
@awl@shitposter.club avatar

@tk @biketooter @cycling @mastobikes i warm the absolute hell out of my hands and feet before going out but for bicycling especially it’s been awhile. Want access to a mountain bike with nice wide tyres for actual snow.

tidmarsh, angielski
@tidmarsh@heads.social avatar

That’s some too-notch infrastructure right there, I tell you what.

@cycling

Anikke,
@Anikke@bildung.social avatar

@tidmarsh @cycling

It is a protection against bikers?

tidmarsh,
@tidmarsh@heads.social avatar

@Anikke @cycling
Gotta keep the football stadium safe

tk,
@tk@bbs.kawa-kun.com avatar
mangeurdenuage,
@mangeurdenuage@shitposter.world avatar

@tk @biketooter @cycling @mastobikes
>add proprietary hardware on a bike.

petrescatraian,

@tk if only there was one type of ebike where you could speed how much you wanted depending on how fast you pedal... Wait a minute!

tk,
@tk@bbs.kawa-kun.com avatar

When @glitter and I got to the bottom of a long hill while yesterday, I heard the tell-tale sign of a leak in my front tire, a well-used . She even said it was smoking, but I knew it was just sealant blowing out.

Thankfully, it was at the end of our ride and I didn't have to deal with steering on a floppy tire. I did snap this picture, though. :blobfoxsweating:

I tried seating it again today and it just wouldn't hold air because of the same spot. That's when I noticed the bulge in the sidewall near the bead, so I decided to toss the tire and put on a fresh (identical) one I had in reserve. The new tire seated without issue, aside from how I had to do it twice because I put it on the wrong way the first time. :blobfoxgooglymlem:

This isn't a knock on Panaracer tire quality, of course. The tire's been through a lot and there was only so much tread left anyway.

@cycling @mastobikes @biketooter

thatbrickster,

@tk I lack the stones to ride tubeless. I'm happy with my Marathon tires and standard pneumatic tubes.

@biketooter @cycling @mastobikes @glitter

StampedingLonghorn,
@StampedingLonghorn@social.linux.pizza avatar

@tk @biketooter @cycling @mastobikes @glitter Must have been a hell of a hill with all that brake dust.

tk,
@tk@bbs.kawa-kun.com avatar

If I were to get a titanium , I'd definitely spec a compliant steel fork. I feel like steel folks get a bad rap because consumer grade production ones are overbuilt, especially ones with disc brakes!

@cycling @mastobikes @biketooter

mhoye,
@mhoye@mastodon.social avatar

@tk @biketooter @cycling @mastobikes

I have an aluminum frame track bike with a carbon fork that I am considering switching to a steel fork. I guess the ride a little whippier but the front wheel is the place you want rigid control over what is moving where...

QRSS_Test,
@QRSS_Test@mastodon.sdf.org avatar

@mhoye @tk @biketooter @cycling @mastobikes IMHO, if you want better control over the front wheel, stick with carbon.

Kay, angielski
@Kay@mastodon.nz avatar

NZ cyclists who also use buses, warning that from Saturday bike racks on public buses will be unavailable due to safety concerns raised by NZ Transport Agency (NZTA). May be temporary but no restoration or replacement date given.

NZTA have advised bus operators but no info for cyclists on their website. Useless agency for alerting actual transport users!

FYI @cyclewellington @cycling https://www.scoop.co.nz/stories/AK2411/S00200/bike-racks-to-be-temporarily-disabled-on-metlink-buses.htm

zeborah,
@zeborah@mastodon.nz avatar

@Kay I was about to reply that Christchuch's Metroinfo had advertised it fairly well but then I reread the details and realised it's now a complete ban, not just a nighttime ban. Whaaaaat??

(Metroinfo does have a news item on their site, I'm not sure if they're updating the posters on the buses or just going to rely on bus drivers warning people individually throughout tomorrow....)

@cyclewellington @cycling

tk,
@tk@bbs.kawa-kun.com avatar

I used to love touring, but after years of doing routes most riding wouldn't even consider, having various kinds of "type 2 fun" times, and then COVID hit, I just can't get myself to do it. That even applies to supported tours like ! Being a "sitting duck" in a sea of drivers of all personalities scares the everliving shit out of me. :blobfoxscared:

During the pandemic and motivated by the psychological pressures of quarantine, I learned how to ride a , and went through various scooters and larger bikes to get to where I am now. I spent so much time riding street (really rural highways to or through natural landmarks) that I got bored of that, too, so I bought a dual-sport so I could, well, honestly ride gravel roads to places farther off that allow OHV and/or larger use. That dual-sport was a CRF450RL and was sprung custom for a much heavier guy than me, which made it super tall for me. :blobfoxsweating: As you can guess, I traded it in for a 700, which I will be riding this weekend on a rural gravel highway that I've ridden before on a much heavier street bike. :blobfoxhappy:

@cycling @mastobikes @biketooter

tk,
@tk@bbs.kawa-kun.com avatar

Added some stuff since originally posting. :blobfoxgoogly:

@biketooter @cycling @mastobikes

tk,
@tk@bbs.kawa-kun.com avatar

How do folks feel about the Clik Valve?

The principle of the SCHWALBE CLIK VALVE, winner of the Eurobike Award 2024, is very simple: it works intuitively with a click. What does it need? The valve and the corresponding pump head or pump head adapter. With the Clik Valve, this can be clicked onto the bike valve with minimal force and removed again very easily after successful inflation.

It doesn’t matter which valve and pump you currently have - thanks to conversion kits for all existing bicycle valves and most pumps. To change the bicycle valve, simply replace the valve insert (Sclaverand, Presta, Dunlop, tubeless valve), for the car valve there is an adapter that is screwed over the valve (and can be easily unscrewed again to be able to use petrol station pumps).

The pump head adapter can be integrated into the pump head of current pumps (by clamping or screwing in), even with hand pumps. The Schwalbe Clik Valve can also be inflated with normal SV (Presta) pumps - thanks to this reverse compatibility, you are never at a loss in any situation. And SKS will already be offering its own CLIK VALVE pump at Eurobike.

Schwalbe will soon be producing the first tubes with the Clik Valve.

@cycling @mastobikes @biketooter

MultimodalNapPerson,

@tk @biketooter @cycling @mastobikes

It seems better than regular presta, but not so much better that I'd rush to convert. It might be more important for people using tubeless setups.

tk,
@tk@bbs.kawa-kun.com avatar

I’ve been running 38mm Panaracer GravelKing tires tubeless on my Soma Stanyan for years, but the front tire I just put on has enough wobble to rub in one spot on every rotation. (The wheel itself is true.)

Two shops told me that the tire wasn’t seated right, but I checked and remounted multiple times and it’s seating fine. Even used some rubbing alcohol to lubricate the tire where it seated, but it always mounts up perfectly fine. The tire is the problem.

The second shop gave the real answer after chatting with the folks there for a bit: I should go down a size. It’s a real bummer, but even the Soma website says it can do up to 35mm. :blobfoxsad:

The only other realistic alternative is a new frameset, or at least a new fork, but that will have to wait for a while. :blobfoxgooglycry:

@cycling @mastobikes @biketooter

tk,
@tk@bbs.kawa-kun.com avatar

Anyone know of any fast-rolling slick or file tread 35mm 650B tires that can be set up tubeless?

@cycling @mastobikes @biketooter

  • Wszystkie
  • Subskrybowane
  • Moderowane
  • Ulubione
  • cycling@a.gup.pe
  • test1
  • Spoleczenstwo
  • lieratura
  • muzyka
  • rowery
  • sport
  • Blogi
  • Technologia
  • Pozytywnie
  • nauka
  • FromSilesiaToPolesia
  • fediversum
  • motoryzacja
  • niusy
  • slask
  • informasi
  • Gaming
  • esport
  • Psychologia
  • tech
  • giereczkowo
  • ERP
  • krakow
  • antywykop
  • Cyfryzacja
  • zebynieucieklo
  • kino
  • warnersteve
  • Wszystkie magazyny