Isn’t it nice to know that you can take your bike into any bike shop and get it fixed? Even if you’re in Mexico, France, Italy, Montana, or even India? If they don’t have the part to fix your bike, they can easily order it and have it fixed in a day or two. Well, it wasn’t always that way. You see, in the 1970’s the International Standards Organization (ISO) spent years of painstaking work involving over 30 nations to develop standard sizes, thread pitches and specifications for common bicycle parts like bottom brackets, hubs, freewheels, head sets, etc…
Before the ISO endorsements were made, each country had its own standards. Even within a country, you could find different standards for different manufacturers. A bicycle made in France used different parts all around than a bicycle made in Italy or the United States. This made life difficult for both the bicycle dealer trying to help a customer, and also for the customer who had purchased a bicycle with standards not common in their area.
While rifling through my 1970’s Bicycling magazines, I found an article on this while the standards were still in development, and it brought to mind many situations that are occurring now in our industry today.
While we have always tried very hard to manufacture our bicycles using standard size parts and specifications to make things easy for our customers, many manufacturers are now veering far from the ISO standards in an effort to create what’s called ‘proprietary’ parts. These are parts designed specifically for that particular frame. It can be something as small as the part that holds the rear derailleur to a carbon frame, or something major like a specific bottom bracket that’s only available from that manufacturer.
I think people should be aware of proprietary parts as they can make life difficult for the customer, as well as the bike shops trying to help that customer. This is especially true for the cyclist touring foreign countries.
Replaceable derailleur hangers and the problems they can pose
Replaceable derailleur hangers Several years ago, I wrote an article called ‘Chaos, the new standard‘. That article holds so much truth even today that I thought a follow up was in order. So, here it goes. A company that’s been around for 51 years, as we have, will tell you the importance of standards. This is a short article detailing one such detour that we took in the 1980’s.
What are standards, and why should you care? If you are a person who wants to buy a bicycle that you will ride for 20 years plus, then standards mean a lot to you. For instance, I ride a Rodriguez road bike the we built here in 1999, and I’m still riding it today. I consider myself a Forever Bike person. I will still be able to buy parts for this bike in 20 years too. Any part that needs replacing we will have in stock. That’s because it’s built around ISO standards (International Standards Organization). ISO standards were settled upon by the bicycle industry in the 1970’s in an attempt to make sure that people could get their bicycle fixed in just about any country, and well into the future. It’s worked miraculously….until recently.
@rekiwi That sounds dope! I wish my kids were so eager for cycling! I’m trying to show them it’s an adventure, but age is their limit for now (7, 5 and 0,5). I’m a gravel converted roadie, doing half of the yearly distance at night, so I hope one day they will go out with me instead going to bed…😂 We will eventually get there! @cycling@rower
My 8 & 11yo boys race track cycling during summer. The local club charge $A5 (=€3/$US3) per session which includes use of a track bike and about 3 races over the course of 2 hours.
Emphasis on fun. They both get up early every Sunday and prepare their own bags so we get there on time.
@ClintonAnderson@systemz Take it easy guys!😅 Of course I did! I can also pull off a "look mom no hands" while pushing the kid next to me. Not that I do it very often, but nothing bad ever happened. I am glued to the saddle, though...😎 @cycling@rower
@ssamulczyk@cycling@rower Oh man… still jealous because I have this year not workout out in the gym on the 24th and neither will on the 31st. Being inactive is shit. 😪
In all my years of #cycling, I've never found a great solution for cold weather. If I bundle up so I'm not chilled, then I soak everything with sweat in short order. If I wear less, then I freeze. I've tried Merino wool, synthetics (Gore, Event, etc.), and so on, but nothing works well enough for me.
Sadly, that means I don't do anything exciting on the #bicycle during the coldest part of the year. Just my daily local loop. :blobfoxsad:
@tk@biketooter@cycling@mastobikes I find I have a crazy steep temp gradient with almost any aerobic exercise and chronically overdress, so this makes sense to me
@tk@biketooter@cycling@mastobikes i warm the absolute hell out of my hands and feet before going out but for bicycling especially it’s been awhile. Want access to a mountain bike with nice wide tyres for actual snow.
If I were to get a titanium #bicycle, I'd definitely spec a compliant steel fork. I feel like steel folks get a bad rap because consumer grade production ones are overbuilt, especially ones with disc brakes! #cycling
I have an aluminum frame track bike with a carbon fork that I am considering switching to a steel fork. I guess the ride a little whippier but the front wheel is the place you want rigid control over what is moving where...