@WilliamNB@nick@cycling@schizanon@famousringo@ssamulczyk I have never had a front derailleur fail either, but then I run friction & replace the cables reasonably often. When servicing other folks bikes, particularly older & lower end bikes, I get a lot of trouble adjusting worn & poorly engineered indexed front derailleurs.
Just run friction, especially on front derailleurs. Few set up issues & so easy to trim.
Kind of annoyed with White Industries at the moment. The original press-fit bearings in my Stanyan’s MI5 rear hub needed replacement a long while ago, so I had my local bike shop order them (which took forever to be shipped by Enduro) and swap them out. Unfortunately, the same amount of play persisted after the bearing swap despite said shop following White Industries’s directions to the T multiple times. My shop has called White Industries multiple times only to not be given any recourse.
I’ve been out that Stanyan for several weeks now and I don’t know if I should just get a different hub put in the wheel or something at this point. :blobfoxannoyed:
@boardmad Ugh, that’s to hard on my legs. I mostly ride in my flat region, but on occasions I go the the mountains to do some climbing. Now with the growing family I can only afforded take one of my bikes. So it is gravel, because it’s more universal, therefore the gearing…🥰@nickzoic@cycling@rower
Tomorrow I’m planning to do clockwise „Rundtur på #Bornholm”, a #cycling trip around the island.
My side hurts, I guess from hitting a tree on a single track, but if I manage to get out at 4am I’m able to be back way before 10am - you know, family!😁😍
The wind and weather forecast seems to be favourable, going against 6-10km/h headwind in the beginning, to finish up with the wind. No rain (fingers crossed)!🙈
While I was riding my main #bicycle on gravel a couple days ago, I was able to easily rescue a front wheel slide.
And when I was riding it yesterday up a fairly steep bit of sandy gravel (for the city), I was able to get past wheelslip and just pedal slowly and softly in a low gear to get up the hill.
For our anniversary run of Rene Herse bikes—and for the bikes we ride in long-distance events—we wanted a better solution: a reliable needle-bearing headset that is Rinko-compatible. This is another project that had a long gestation period: We made the first prototypes three years ago. We ran them in Unbound XL (twice), in Paris-Brest-Paris, Arkansas High Country Race, Dark Divide 300 and many other rides and adventures. Along the way, we fine-tuned many details, both aesthetic and functional. We decreased stack height, lowered weight, and increased clearances to make sure the headset works smoothly and quietly under the harshest conditions. We tested and re-tested, and now the headsets are ready.
Found these cute old sheds (still in use!) in Woodland Park while exploring a new route with the knobby-ish gravel tires on my Soma Stanyan. :blobfoxthumbsup: (1)
Definitely getting better with the color calibration tool in #Darktable. Having the flexibility to pick any hue for the illuminant is very nice! :blobfoxgoogly:
It took many years and many professional bike fits for their extremely valuable #bikeFit tips to finally sink in. :blobfox0_0:
It took me following a hunch over several months to get to the general area where my saddle and handlebars should be for their tips to finally make sense and complete the picture in my mind. (My saddle was way too low for a long time because my first bike fitter was trying to work with my horrible technique early on, which caused me to tear a quad in one leg. :blobfoxscared: )
New #Shimano#SLX right crank arm with narrow wide oval chainring. Finally, bottom bracket is as designed, with only 3 spacers and it all fits like a glove.
For all those who like to mix and match #cycling gear - Shimano #Deore axle is to long for SLX crank arm, despite them calling it all the same #HollowtechII...
"Platinum Bike-Friendly" #DavisCA still hasn't replied to the email I sent about the rampant scofflaw parking in the cycle lane. I just sent them more photos today of the same corporation's vehicle parked illegally, blocking visibility & endangering people at an intersection.
If you ride, your brain knows how motorcycles work intuitively, but we bet you’ll struggle to explain it accurately. We’re trading opinions for science in a pursuit to understand how motorcycles really steer.
These dynamics also apply to #bicycle riding, obviously.